Get Amazing WiFi in your Garden OfficeThe best way to Get WiFi in Garden Office or Garden Room UK is using an Ethernet Cable as a way to connect to the main router's WiFi & Internet access. After that, a powerful WiFi access point or WiFi Hub can be connected to the cable in the garden office and configured to match the main router's WiFi name and password. If running a cable in a garden is not practical due to layout or terrain another option is a Point-to-Point System. This type of system sends data from building to building wirelessly over long distances, without loss of speed or bandwidth, and without needing a cable in between. Our Garden Office WiFi service has become increasingly popular, especially for newly constructed outbuildings, garden rooms, and cabins that have been made into a family room, gym, or home office. Where a constant and reliable Internet connection is required for browsing the internet, media streaming, and working online. How to Get WiFi in Garden RoomThe Best way to get WiFi in your in your Garden RoomWith a CAT6 or CAT6a Ethernet Cable up to 100 meters from the property. Ethernet Cable Connection: 1. Run an Ethernet cable from your main home Wi-Fi router to your garden office. Use an external CAT6 or CAT6a Ethernet cable in a flexi-conduit for optimal performance and ultra-fast gigabit speeds. 2. Connect one end of the cable to an available Ethernet port on your ISP main router inside the house. Then route the cable through any holes, flexi-conduit or trench to reach the garden office. WiFi Access Point Installation: 1. At the garden office end of the Ethernet cable, install a powerful Wi-Fi 6 access point or a dedicated Wi-Fi 6 Hub with LAN ports. (best for a PC, Laptop or any device that supports an Ethernet connection) 2. Configure the access point with the same Wi-Fi network name (SSID) and password as your main router. This ensures a seamless roaming experience between the house and the garden office. Enjoy Garden Office WiFi: Once set up, your garden office will have a strong and consistent Wi-Fi signal, with high-speed gigabit Ethernet allowing you to work, stream media, and browse the internet without interruptions How to Get Internet in Garden OfficeVia a long-range Point-to-Point System with a range of 10m-100m up to a max of 12 miles. When an Ethernet Cable method is not suitable for the property layout or terrain constraints another excellent second choice option is a wireless Point-to-Point system to get Internet in the Garden Office. For a successful WiFi Point-to-Point Installation, it is crucial to ensure that there is a clear line of sight (L.O.S.) between the two buildings that will be connected by the Wireless bridge. Point-to-Point devices can be mounted on walls, roofs, or poles at elevated heights. The first step is to connect a wired device (AP) to your network, which will transmit the signal to the remote location and activate the receiver (Client). Once the connection is established, a LAN network can be created and directly connected to a computer, network switch, WiFi access point, or IP CCTV cameras. You can also re-distribute the LAN from the Client end, enabling secure multi-LAN and WiFi Network connectivity across large areas. Line of Sight (L.O.S.): Ensuring an unobstructed view between the two buildings is critical for a reliable Point-to-Point (PtP) WiFi connection. Any obstacles like trees, buildings, or terrain can hinder signal transmission. Mount the PtP WiFi devices on walls, roofs, or poles at elevated heights to maximize the L.O.S. Hardware Setup: Access Point (AP): Begin by connecting an AP (wired device) to your existing network. The AP will transmit the WiFi signal to the remote location. Receiver (Client): Install the Client receiver at the remote building and power it up to start receiving the signal from the AP. Establishing the Connection: 1. Once the hardware is in place, configure the AP and Client settings. Ensure they operate on the same frequency band (e.g. 5 GHz). 2. Set up security (WPA2/3 encryption) to protect the connection. 3. Align the AP and Client for optimal signal strength. 3. Test the connection to verify successful communication. Creating the LAN Network: With the PtP connection established, a Local Area Network (LAN) is created at the remote location and devices can be connected directly to the Receiver's LAN port. Desktop Laptop: For direct super-fast internet access. Network Switch: To expand connectivity to multiple devices. WiFi Access Point: To provide wireless connectivity within the remote building. IP CCTV Cameras: For Live security, doorbell and surveillance purposes. Smart TV Audio: For entertainment, audio-video and media streaming. Distribution from the Client End: Point-to-Point system can redistribute the LAN from the receiver end to multiple buildings over a very wide area linking sites to the main network. Multi-LAN: Enable secure communication between different LAN segments. WiFi Network: Extended WiFi Network coverage across large areas. Point-to-point systems can cover varying distances, from short-range (10 meters) to long-range (up to 15 miles), depending on the scenario. A professional installation is always recommended to ensure optimal performance, alignment, speed and reliability. Other related pages... |
|